Store Hours
Mon - Thurs: 9:30AM - 8:00PM
Friday: 9:30AM - 4:30PM
Saturday: 10:00AM - 4:00PM
Closed Sunday
1449 1st Ave NW     New Brighton, MN 55112     651-636-2617
  • Design Center
  • Residential & Commercial
  • Designer Discounts Available
  • Sheet Vinyl Care

    To keep the lasting shine and fresh feel of your investment for as long as possible, we recommend that you...
    DO
  • Wipe up spills as soon as possible. Remove dried spills with Cleaner on a white cloth.
  • Wash your floor occasionally with a no-rinse floor cleaner.
  • Use manufacturer recommended Floor Stripper and Cleaner for heavy duty cleaning.
  • Use manufacturer recommended Floor Polish to return your floor's original shine if it begins to dull over time.
  • DON'T
  • Use detergents, abrasive cleaners or "mop and shine" products - they may leave a dull film on your floor.
  • Use paste wax or solvent-based polishes.
  • Use a beater bar when vacuuming because it can visibly damage the floor surface.
  • Use highly abrasive scrubbing tools.
  • PROACTIVE PROTECTION FOR YOUR FLOOR
  • When moving appliances or heavy furniture, lay a plywood panel on your floor and "walk" the item across it. This protects your floor from scuffing and tears.
  • Use floor protectors, such a Armstrong Floor Protectors, on furniture to reduce indentation. As a general rule of thumb, the heavier the item, the wider the floor protector needed.
  • Be careful with rolling casters. They can damage the floor. Therefore, we do not recommend them. If you choose to use them, the double wheel type are the best option.
  • Place a walk-off mat at outside entrances to reduce the amount of dirt brought into your home. We do not recommend the use of rubber- or latex-backed mats because the chemical (antioxidant) used to keep the backing from becoming brittle can permanently stain your floor. We suggest a nonstaining vinyl-backed mat or a woven rug that is colorfast. Most of these products are identified "colorfast" by the manufacturer. All Armstrong floor care products have been specifically developed to care for Armstrong floors. You may purchase Armstrong floor care products at your local flooring retailer.
  • IMMEDIATELY AFTER INSTALLATION
  • For 8 hours after seam application, protect the sealed seams on your flooring. This will ensure the proper seam bond. If your seams are disturbed before they're dry, permanent damage may result.
  • Maintain room temperature at 65 degrees Fahrenheit for 48 hours after installation is completed. This assures proper curing, setting and bonding of products.
  • The adhesive under your floor needs time to thoroughly dry after installation. Therefore we recommend that you do not scrub or wash your floor for five days.
  • You can always go to our links page which will bring you directly into the manufacturer’s web site

    Over 30 Years of Flooring Excellence From Our Family To Yours
    Small Logo